X2R*N-2 2019 Firmware Update
Please select the relevant link from above for your recorder,
Once downloaded, please extract the file and copy the folder "hdvrupgrade" over to a flash drive,
Insert this into one of the available USB ports on the NVR
Open the setup screen, go to System > Maintenance and select Upgrade
No select "Choose FIle" and select the .SW file from the USB Drive and select OK.
If you have created a password for the recorder , you will need to enter this to confirm
The install will now proceed , once the unit has rebooted the installation will begin.
**IMPORTANT - Do not unplug or power off the recorder during this update application**
Related Articles
XR960D8 Firmware Update (2015 version)
XR960D8 Firmware 1. Create a new folder in a USB flash drive and name it "dvrupgrade" and put the upgrade file in 2. Insert the flash drive into the device 3. Go to Start>Maintenance>Firmware upgrade in DVR Menu 4. Select the file from the USB drive ...
XR960D8 Firmware Update (2014 Version)
XR960D8 Firmware 1. Create a new folder in a USB flash drive and name it "dvrupgrade" and put the upgrade file in 2. Insert the flash drive into the device 3. Go to Start>Maintenance>Firmware upgrade in DVR Menu 4. Select the file from the USB drive ...
XC1080VVP-2 Firmware Update
Firmware Update for XC1080VVP-2 XC1080VP-2 XC1080BP
X2C4000 Firmware update
X2C4000 Cameras Firmware update 24/05/2019 Download and install directly onto camera either via Web Browser (IE on PC) or via the XIQ CMS software for PC/MAC
How to update the firmware of a XVision IP camera via XVision XN*P NVR
This video will show you how to perform the camera firmware update via the Network Video Recorder Kind Regards Y3K Technical Team
>>> Please note to request a support call you will first need to have logged a ticket <<<