Setting PID and Schedule
This attached video will show you how to Create a rule in PID (Perimeter Intrusion Detection) , and setting the activation schedule
1) Go to Set up Menu
2) Click on Intelligent under Channel
3) Select the channel number and click on the COG to enter settings
4) Draw the box by left clicking on the mouse and drawing your detection area
5) Select your rule settings , So A to B, B to A or Both
6) Once complete Right click to exit settings page , and click on the box under Switch to activate
7) Click on Schedule and using the left click and holding select your days/hours of activation
8) Once selected schedule click APPLY bottom right of screen to save
DONE ...
Related Articles
Smart-i SHP100R Power Control Socket Schedule Setup
** Please be aware that the support period for this product has ended. We recommend considering an upgrade to your equipment. ** The SHP100R is designed to extend the range of the 868.3 MHz wireless connection NOT the 802.11 Wifi signal. It is used ...User Manual for IP Cameras X4C, X5C and X6C Range of Cameras including Speed Domes
Thank you for purchasing Xvision IP Cameras. Below, you'll find helpful resources to assist you in configuring and using your new Cameras. If you encounter any issues with your equipment, please visit support.y3k.com. There, you can submit a support ...X4C5000SD33 Speed Dome User Manual
X4C5000SD33 Speed Dome User ManualIQR5000 DVR User Manual
** Please be aware that the support period for this product has ended. We recommend considering an upgrade to your equipment. ** User Manual for IQR5000 DVR recorders IQR5000D4H IQR5000D8H IQR5000D16H IQR3000D32HIQR5000 User Manual
** Please be aware that the support period for this product has ended. We recommend considering an upgrade to your equipment. ** This manual covers all IQR5000 Hybrid Digital Video Recorders