How to Access the Cameras OSD

• Related Articles

• RTSP Stream Info for XVision IP cameras

  Please use the following strings for Network Cameras/DVRs/NVRs X2C X4C & X5C Cameras Main Stream rtsp://192.168.1.168:554/ch00/0 Sub Stream rtsp://192.168.1.168:554/ch00/1 To Stream a Channel from the NVR/Recorder , XNxP / X2RxxxN / XHR1080DxxH (and ...

• How to Activate Milesight IP Cameras

  In the Linked video we explain on how to activate the milesight IP cameras  Best regards Y3K Technical Support Team 

• IQR960 DVR Range Port Forwarding Guide - Configuring Internet Access

  Please see below link on how to open ports to allow internet access on your IQR960 DVR for access outside your network DOWNLOAD For additional support on opening ports please contact your ISP or consult the manual for you router Note: If you use a ...

• SD Card Support on XVision IP Cameras

  As we are sure you are aware, there are many types of SD card available on the market currently  Now Most of these cards will be genuine , but there are some out there being sold as branded cards which are in fact duplicates and can cause many issues ...

• How to add IP cameras to a MIlesight NVR

  The linked video will show you how to add Milesight and XVision IP cameras to a MIlesight NVR  Best regards Y3K Technical Support Team